• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are easy to maintain, durable and long-lasting. In contrast to aluminium and timber, they don't corrosion or rot.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will help avoid unnecessary repair costs as well as improve energy efficiency.

1. Broken Glass

The broken glass in your windows could cause significant damage to your home and even be fatal. It is crucial to take the time to ensure that you are doing everything you can to keep your windows in good repair.

For single pane windows, it can be relatively simple to replace windows, and the new one is usually able to fit into the frame that was previously installed easily. However when windows with double glazed window repairs near me panes are secured by internal beading, it'll be more difficult to take out the existing panes and install new ones. In this case, you will need to find some plastic spacers that will help the new pane to fit properly into the frame of the window.

Wearing protective eyewear and thick gloves is a must for anyone who plans to remove the glass yourself. It is also a good idea to lay down a dropcloth before you start working on the glass to ensure that any shards will fall on the fabric rather than on the floor where they could be trodden under and cause further damage.

It's a good idea to cover the gap with tape after the glass has been removed. This will prevent drafts and water from entering your property until a professional comes out to repair the window. It also acts as a barrier that will prevent any intruders from gaining entry to your home. If the gap between the window and the door is substantial, you may prefer a security screen that also has a window. This will provide the best of both.

2. Sagging

Upvc is a long-lasting and energy efficient alternative to timber sash windows. However, over time, they are susceptible to a range of issues like sliding. A sagging window in uPVC can cause issues with light, draughts and even security. It's important to take action when you realize that your uPVC windows are falling down.

Repositioning the hinges could help fix a window that is sliding. To accomplish this, you'll need open the window to access the frame. You can then unscrew both the hinges at the top and bottom with a screwdriver and adjust them clockwise or counter-clockwise. Close your window to test the fit after having repositioned your hinges. If you're happy with the fit, tighten the screws to ensure that they stay in position.

If you are unable to reposition the hinges, you may need to replace the seal. Rubber seals can dry out and lose their elasticity with time, which causes them to loosen. It is important to replace your seal as soon as you can in order to keep your uPVC window watertight and draughtproof.

uPVC handles could also become loose. This is usually due to screws that have been removed over time, but it can also be caused by the handle mechanism wearing out. Fortunately, it's easy to repair the handle of a window that is loose yourself. First, you'll need to close the window and perform a test fit. The joints at the corners of the sash should align with the joint on the casing. If it isn't then you can make use of a screwdriver to loosen the handle and reverse the mechanism back into its original position.

3. Water Leaks

It is essential to take action if you awake each day to discover mouldy walls and wet floors. The leaks of water through windows could cause structural damage to your home and impact your ability to regulate the temperature in your home. The most common reason for leaks in uPVC windows is that the sealant surrounding the frame is either damaged or missing.

It is a fairly easy fix and should be undertaken by any competent DIYer. Depending on the severity of the issue the caulking that was used up might need to be removed before a new layer is applied. It is important to keep in mind that when it is about uPVC window repairs, do avoid the temptation to "over-caulk in order to make the area more difficult to clean and reduce your energy efficiency.

It is important to check that any drainage holes are free of debris and that the sill pan is placed in a way that allows it to drain away from the window. In more serious situations, you may have to replace the window repairs near me.

Mold spots and rotten sills are also signs of water leakage. The fungus thrives in humid conditions and can propagate quickly throughout the home.

If the leakage occurs between the double-glazed glass, it is more likely that the issue is more related to the seal, not the frame. This can be easily fixed by an uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason if your uPVC window is difficult to open or if it blows open with the breeze. Anyone who is a skilled DIYer can fix hinges in just a few minutes.

Almost every household in the UK will have either top hung or side-hung uPVC windows that use hinges and like any mechanical part they will wear out over time. It is essentially a very simple process, but it's easier when you have a person to assist in holding the frame up.

Make sure that the uPVC hinges open and close in the right direction. You can do this by looking for the arrow on each hinge, this indicates which way the window should be opened.

Window hinges that aren't working properly could be the result of incorrectly opening the window in a particular way or due to improper installation in the factory. Sending us photos via our website is often enough to solve the issue. We are happy to give assistance.

It is also essential to grease the hinges on a regular basis. Applying a light engineering lubricant on the hinges is a great method to accomplish this. We recommend using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It also decreases the possibility of a window sticking and help prevent corrosion. The ideal time to perform this every year. WD40 and other solvent-based lubricants should not be used as they can damage your uPVC windows.

5. Draughts

Draughts can be caused by different causes. The hinges can also be disaligned as a result of wear, creating an opening where the sash and frame meet. If they are beyond repair, it might be necessary to get them re-aligned. The second is the interlock, which is located on the hinge side of the window, may also become misaligned, again it may be feasible to give them a clean but in certain cases, it may be necessary to have them replaced.

These seals can wear down or become damaged over time, allowing air to escape. Replacement of these with high-quality weatherstripping can help stop draughts. Another alternative is to replace the upvc window with low-emissivity glass. which will help regulate indoor temperatures and again will reduce draughts.

The last way to reduce the amount of draughts is to use a Draught-excluder. These are usually fabric tubes filled with a filler which can be hung over your window sill. They can help block out cold air and keep your home warm and cozy!

With a bit of regular maintenance and repairs, your upvc windows will provide excellent insulation and security for your home. It is important to remember that all windows will eventually get worn out and it could be more cost-effective to simply replace them than to repair them. If you have any problems with your upvc window it is recommended to speak with a professional as soon as possible.