• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

upvc window repair windows are a great choice for modern homes. They are durable, long-lasting and easy to maintain. They are not susceptible to decay or rust as aluminum and timber.

It is essential to clean and oil UPVC doors and windows on a regular basis. This will help prevent unnecessary repair costs and also increase energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause serious damage to your home, and could even be fatal. It is essential to ensure that your windows are in good condition.

For single pane windows, it is fairly easy to replace windows, and the new one is usually able to fit into the frame that was previously installed easily. If you have double-paned windows that are held together by internal beading, it is difficult to remove and replace the old panes. In this situation you'll need locate some plastic spacers that aid the new pane in being able to fit perfectly into the frame of the window.

Wearing eye protection and thick gloves is essential when you are planning to remove the glass yourself. It is also a good idea to lay down a dropcloth before you begin working on the glass to ensure that any shards will fall onto the fabric instead of landing on the floor where they could be trampled on and cause further damage.

After the glass has been removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to block water and drafts from getting into the home until a professional can come out and repair the window. It also acts as an obstruction to prevent criminals from getting into your home. If the gap is large, you may want to consider using a security door that has an integrated window as it will provide the best of both worlds.

2. Sagging

Upvc windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber windows with sash. However, over time, they can suffer from a variety of problems including sagging. A sagging uPVC window can cause issues with light, draughts and even security. It is crucial to act when you realize that your uPVC windows are sagging.

To fix a window that is sagging you can try repositioning the hinges. To do this, you'll have to open the window so that you can access the frame. Then, you can remove the hinges at the top and bottom using a screwdriver and adjust the hinges clockwise or counter-clockwise. Once you've repositioned the hinges, shut your window and test it for fit. If you're satisfied with the size of the window, you can tighten screws to keep them in place.

If you are unable to reposition the hinges, you might have to replace the seal. Seals made of rubber can dry out and lose their elasticity over time, causing them to loosen. It is crucial to replace your seal as quickly as you can to ensure that your uPVC window repairs near me watertight and draughtproof.

uPVC handles may also become loose. This is often caused by screws that have become undone over time, but it can also be caused by the handle mechanism wearing out. Luckily, it's not difficult to fix a loose uPVC window handle yourself. First, you'll need to close the window and then perform an initial test fit. The corner joints of the sash need to be aligned with the casing joint. If it does not then you can use the screwdriver to loosen up the handle. Then, turn the mechanism into position.

3. Water Leaks

It is crucial to act if you wake up every morning to find a smoky wall and floors that are wet. Windows that leak water do not only lead to the destruction of your home's structure but also undermine your efforts to regulate the temperature within your home. The most common reason for leaking uPVC windows is that the sealant around the frame has been damaged or missing.

This is an easy fix that can be done by any DIYer who has the ability. Depending on the severity of the issue the old caulking might need to be removed before a new layer can be put on. It is crucial to keep in mind that when it is about uPVC window repairs you should avoid the temptation to "over-caulk in order to make the area harder to clean and can reduce your energy efficiency.

It is important to check that any drainage holes are free of debris and that the sill pan is angled properly so that it drains away from the window. In more extreme situations, you may have to replace the window.

Other signs of long-term water leakage are rotted sills and the appearance of black spots of mold on the wall near the window. The fungus thrives in damp conditions and can spread quickly throughout the home.

It is also important to remember that if the leakage originates from the glass of your double glazed windows it may be more likely to be an issue with the glass seal, rather than the frame or sagging. A uPVC specialist can easily fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be the reason when your uPVC window is difficult to open, or if it opens in a breeze. They can be easily replaced by any competent DIYer and can usually be completed in a matter of minutes.

Like any mechanical component hinges are prone to wear out over time. It is essentially a very simple process but it can be easier to do with someone else to assist in holding the frame in place.

It is also important to verify that the uPVC hinges are being opened and closed in the correct direction. Check for the arrows on each hinge to determine the direction in which the window should be opened.

The issue could be caused either by opening the window improperly or by a poor installation in the factory. Sending us photos via our website is often enough to resolve the problem. We are happy to provide assistance.

Regular lubrication of hinges is also essential. Applying a light engineering lubricant on the hinges is an ideal method to accomplish this. We recommend using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window to operate and close more easily. It can also prevent corrosion and decrease the chance of sticking. The ideal time to do this at least once a year. WD40 and other solvent-based lubricants are not recommended as they could damage your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by a variety of different things. Firstly the hinges, again due to wear and tear may become displaced, which will cause gaps to develop where the sash meets the frame. They can be repaired by giving them a good clean, but in the event that they are beyond repair it could be necessary to have them re-aligned or replaced. Secondly the interlock, this is located on the hinge of the window and can also become misaligned, again it's possible to just give them a thorough clean, however in certain cases, it may be necessary to get them replaced.

The second most frequent cause of draughts is the window seals, these can become worn down or damaged over time, and allow air to escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the upvc window repairs near me windows with low-emissivity lenses. This will help to regulate indoor temperatures and lessen the possibility of draughts.

The last way to reduce draughts effectively is by using a Draught-excluder. These are typically fabric tubes filled with a filler, which can be placed over your window sill. These will help to keep cold air out and keep your home warm and cosy!

The windows made of upvc can remain a great source of insulation and security for your home by performing regular maintenance and repairs. It is important to remember that all windows eventually wear out and it may be more cost-effective to replace them rather than repair them. So, if you are having issues with your upvc windows, it is recommended to seek assistance from a professional as soon as possible.